W35B V2 is a compact tactical rail light with high luminous flux and high intensity, delivering 1,520 lumens and 120,000 candela, with a beam distance of up to 692 meters.

The bezel diameter is only 31.5 mm, and the body has two mounting holes that allow the W35B V2 to be installed on Picatinny, MIL-STD-1913, STANAG 2324, STANAG 4694, Weaver, and other similar rails using the Weltool PM4 mount. It can also be mounted to M-LOK or KeyMod rails with other dedicated mounts.

The light head uses a fully potted structure for excellent shock and vibration resistance. It is IP67-rated, providing waterproof and dustproof protection.

It comes standard with a tail tactical momentary switch that supports full-power output; a soft press provides silent momentary activation, and a click engages constant-on mode.With a modular design, the LH8 V2 light head, W35 body, and TC70 tailcap are all compatible with Weltool series accessories.

Product Features:

The housing is CNC-machined from aluminum alloy and anodized (available in black, FDE, OD green, and other colors)

Equipped with a high-power 5700K neutral white X-LED

Output:

Powered by one rechargeable high-drain 18350 lithium-ion battery

Equipped with a tail press switch capable of full-power output, with a lifespan of 50,000 presses

Features reverse-polarity protection

Includes low-battery warning and over-discharge protection

No flicker, no noise, no delay, and equipped with temperature regulation protection

Tempered glass lens with double-sided anti-reflective coating

1-meter impact resistant

IP67 rated for dust and water resistance; can be used in heavy rain

Each light head has a unique serial number

Dimensions: (Head diameter) 31.5 mm, (Length) 119 mm ± 0.5 mm

Weight: 106g ± 0.5g (excluding battery)

Included accessories: one USB-rechargeable high-drain 18350 lithium-ion battery, O-ring, and USB charging cable

Operating Instructions:

• Install the battery correctly before use.

• This tactical light has reverse-polarity protection. If the battery is inserted incorrectly, the light will not turn on, but it will not be damaged. please check whether the battery is inserted in reverse.

• After installing the battery, half-press the tail switch (without releasing) for momentary activation; release the switch to turn it off.

• Fully press the switch until you hear a “click” to activate constant-on mode. Press it again until it clicks to turn the light off.

• When the battery is low, the light will flash to indicate low power, then the brightness will decrease. Please replace the battery promptly. After the warning flash, the light may shut off automatically at any time.

Usage Tips

• Do not disassemble the light head or the switch yourself; doing so will void the warranty and may damage the product.

• When the light is on, heat will be rapidly transferred to the exterior. The body becoming warm is normal. When the head overheats, the brightness will automatically step down.

• Use a switch capable of full-power output; otherwise, low-battery warning flashes or abnormal operation may occur.

• After long-term use, the O-rings on the flashlight may age. Please replace them in time to maintain waterproof performance.

• Excessive thread grease may cause poor electrical contact or malfunction. Please keep the conductive contact surfaces clean.

• Because batteries self-discharge, remove the battery during long-term storage and recharge it periodically.

• This tactical light is water-resistant but not designed for professional diving. Do not submerge it in water when the light is hot.

• Avoid shining the light directly into eyes while it is on to prevent eye injury.

• Avoid touching the flashlight body during operation to prevent burns.

• Keep the flashlight out of reach of children.

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov