The T2 is a compact and portable LED flashlight powered by one 18650 lithium-ion battery or two CR123A batteries. It delivers a maximum output of 2,090 lumens, 51,000 candela, and a beam distance of 451 meters. The flashlight offers three modes: Low-High-Full power.The head features Weltool’s patented Through-Hole Cooling structure, which allows heat generated by the LED and electronic components to be efficiently dissipated through air convection.The T2 has mode memory, as well as reverse polarity protection, low-voltage warning, and over-discharge protection.

The stainless steel bezel with strike tips provides excellent wear and impact resistance, effectively protecting the head.It also includes a stainless steel pocket clip for convenient everyday carry.

Features:

Aluminum alloy material, hard anodized surface, available in BK, ODG or Gray

Aluminum alloy reflector, coated tempered glass lens

High power white light X-LED, color temperature 6500-6800K

Output:

Data is obtained from outdoor continuous lighting test using Weltool 3400mAh 18650 high drain Li-ion battery and Panasonic CR123A battery.

The flashlight has battery over-discharge protection (when using lithium-ion battery), battery reverse connection protection, low voltage reminder function, memory mode function.

No flicker and noise

Patented through hole cooling structure

Battery type: 1 high drain 18650 lithium-ion battery or 2 CR123A batteries

IP67 , can be used in heavy rain

Passed the 1 meter height drop test

Each flashlight has its own serial number

Weight:101±1g (without battery)

Dimensions (±0.5mm): (Head diameter) 26.5mm, (Body diameter) 24mm, (Length) 135mm

Included: Weltool 3400mAh high drain 18650 Li-ion battery, charger,O-ring, stainless steel pocket clip(Has been upgraded to a deep carry pocket clip)

Operating Instructions:

• First, make sure the battery is installed correctly. If the flashlight does not work, please check the battery promptly.

• After installing the battery, lightly press the tail switch to turn on the flashlight. Release the switch to turn it off.

• After releasing the switch, immediately press it lightly again to switch to the next mode. By repeating this operation, you can cycle through Low – High – Full power modes.

• At any mode, press the switch until you hear a “click” sound to lock in the current mode. Press firmly again until you hear another “click” to turn off the flashlight.

• When the flashlight is turned off, it will memorize the mode that was active at shutdown. The next time you turn it on, it will resume in the last used mode.

• During use, when the battery is running low, the main light will flash to remind you to recharge the battery in time.

• When the battery is completely depleted, the flashlight will automatically stop working.

Use suggestions:

• Do not disassemble any parts of the flashlight yourself, as this will void the warranty and may cause damage to the flashlight.

• It is normal for the flashlight to heat up during operation, but it is recommended not to use full power mode for extended periods. If it feels hot to the touch, switch to a lower mode to ensure safety.

• After prolonged use, the O-rings may age—please replace them in time to maintain waterproof performance.

• Applying too much thread lubricant may cause electrical conductivity issues.

• If the flashlight flickers abnormally or fails to operate, it may be due to dirt on the contact surfaces. Try cleaning the conductive contacts with an alcohol swab.

• Because lithium-ion batteries self-discharge over time, it is recommended to remove the battery if the flashlight will not be used for a long period, and recharge it at least once every two months.

• This is not a diving flashlight.

• Do not shine the beam directly into eyes or onto skin to avoid eye injury or burns. Keep this product out of reach of children.